Panasonic DX-800 Fax Manual page 79

Fax Parameter Table
No. Parameter
032 COPY REDUCTION
034 ENERGY SAVER
MODE
035 DAYLIGHT TIME
036 RING PATTERN
DETECT (DRD)
(See Note 2)
037 RCV TO MEMORY
038 ACCESS CODE
039 PIN CODE ACCESS
042 CONF. POLLED FILE
SAVE
043 PASSWORD-XMT
Continued on the next page...
Setting
Setting
Number
1 Manual Selecting whether the machine performs the copy
reduction ratio automatically or manually.
*2 Auto
Manual : The machine will prompt you for the Zoom ratio
Auto
1 Off To reduce the power consumption in standby, select either
Energy-Saver or Sleep mode and specify the Delay Time
*2 Energy-
(1 to 120 minutes) for the machine to enter into the
Saver
selected mode.
The Delay Timer setting is only available in the Energy-
Saver or Sleep Modes.
Off
Energy-Saver Mode : Saves energy by consuming less
1 Invalid Selecting whether the clock adjusts for Daylight Saving
Time automatically. The built-in clock will advance 1 hour
*2 Valid
at 2:00 am on the first Sunday in April and fallback 1 hour
at 2:00 am on the last Sunday in October.
*1 Invalid All ring patterns.
2 Valid Select a ring pattern for automatic answering.
1: A Standard ring pattern.
2: B Double ring pattern.
3: C Triple ring pattern (Short-Short-Long).
4: D All other triple ring patterns, except the
(----) Enter a 4-digit password used to print out the received
document in memory by using F8-5 (RCV TO MEMORY).
When F8-5 is set to On, this parameter will not be shown
on the LCD display. (See page 169)
(----) Enter a 4-digit Access Code to secure the machine from
unauthorized use. (See page 167)
*1 None Selecting the access method (Prefix or Suffix) to dial a
number with PIN Code. (See page 174)
2 Suffix
3 Prefix
*1 Invalid Selecting whether the machine saves the confidential
polled file even after the file is polled once.
2 Valid
*1 Off Setting a 4-digit XMT-Password and selecting whether the
machine performs and checks the XMT-Password of the
2 On
receiving station when transmitting. (See page 195)
Customizing Your Machine
Comments
(100% to 70%) when making copies.
: The machine will automatically determine the
reduction ratio according to the length of the
original document.
: The unit will remain in standby
mode and consume more energy
than when in Energy-Saver or
Sleep modes.
power than when in standby mode
by turning off the fuser unit after
the specified time.
type C described above.
79