Setting The Internet Parameters; Setting The Parameters For The Lan Interface - Panasonic DX 1000 - PanaFax B/W Laser Printer User Manual

Setting the Internet Parameters

02013000002

Setting the parameters for the LAN Interface

Depending on how the DX-1000 will be configured to communicate on the LAN, the appropriate parameters
02013020001
listed in the table below must be first stored. (See pages 12 to 16)
Parameter
02013050001
1 DATE & TIME
2 LOGO
3 CHARACTER ID
4 ID NO.
5 MAC ADDRESS
6* IP ADDRESS
7* SUBNET MASK
8* SMTP SERVER NAME
8* SMTP SERVER IP ADDR
9* DEF. ROUTER IP ADDR
10* EMAIL ADDRESS
11* DNS SERVER IP ADDRESS
12* POP SERVER NAME
12* POP SERVER IP ADDR
13* POP USER NAME
14* POP PASSWORD
15* HOST NAME
16 DEFAULT SUBJECT
17 DEFAULT DOMAIN
18 REMOTE PASSWORD
19 RELAY XMT PASSWORD
20 MANAGER'S EMAIL ADDR
21 DOMAIN NAME (01)
22 DOMAIN NAME (02)
23 DOMAIN NAME (03)
24 DOMAIN NAME (04)
25 DOMAIN NAME (05)
26 DOMAIN NAME (06)
27 DOMAIN NAME (07)
28 DOMAIN NAME (08)
29 DOMAIN NAME (09)
30 DOMAIN NAME (10)
* Contact your Network Administrator for this Information.
01007030001
40
Comments
Current Date and Time. (See page 36)
Up to 25 characters & digits. (See page 37)
Up to 16 characters & digits. (See page 38)
Your Fax Telephone Number. (up to 20 digits, See page 39)
Hardware Address hard–coded into the DX-1000. (If required, can be obtained
from the 2nd page of the Fax Parameter List printout, by pressing
[FUNCTION][6][4][SET])
IP Address assigned to your DX–1000.
Subnet Mask assigned by the Network Administrator.
The name of the SMTP Mail Server. (Up to 60 characters)
IP Address of the SMTP Mail Server.
IP Address of your Default Router.
The Email Address assigned to your DX–1000 for sending and receiving. (Up
to 60 characters)
IP Address of the DNS Server.
Name of the POP Mail Server.
IP Address of the POP Mail Server.
User Name assigned to your DX–1000. (Up to 40 characters)
Password assigned to your DX–1000. (Up to 10 characters)
The Host Name assigned to your DX–1000. (Up to 60 characters)
The default information to be added to the Subject Line for all outgoing email
(up to 40 characters). To manually input this information before transmission,
change the Fax Parameter No. 92 (SUBJECT LINE ENTRY) to "2:Valid".
When the outgoing email address is incomplete by SMTP standards, the
Frequently Sent Domain specified here will be automatically added to the
email address. This feature is also useful as a shortcut when manually
entering email addresses to a frequently used Domain. (Up to 50 characters)
This is a security password that allows Remote Programming of Dialer via an
Email. (Up to 10 characters)
A password that provides Network security for your Relay Station (used
exclusively for G3 relay purposes). (Up to 10 characters)
Department Manager's Email Address for notification of all Internet relayed
transmissions for supervision and cost control purposes. (Up to 60
characters)
Enter the Domain Name(s) that have been authorized to access your Internet
Fax for Relayed XMT Request. Fax for Relayed XMT Request
(U to 30 characters) (Up to 30 characters)