Fax Parameter Table - Panasonic DX-800 Fax Manual

Fax Parameter Table

No. Parameter
001 CONTRAST
002 RESOLUTION
004 STAMP
005 MEMORY
006 DIALING METHOD
007 HEADER PRINT
008 HEADER FORMAT
009 RCV'D TIME PRINT
010 KEY/BUZZER
VOLUME
012 COMM. JOURNAL
013 AUTO JOURNAL
PRINT
Continued on the next page...
Setting
Setting
Number
*1 Normal Setting the home position of the CONTRAST key.
2 Lighter
3 Darker
1 Standard Setting the home position for the RESOLUTION.
*2 Fine
3 S-Fine
4 Halftone
(Fine)
5 Halftone
(S-Fine)
*1 Off Setting the home position of the STAMP key.
To select the stamp function when document is stored in
2 On
memory, see Fax Parameter No. 28.
1 Off Setting the home position for memory transmission/copy
mode. (This setting can be temporarily changed by using
*2 On
F8-9 (MEMORY XMT))
1 Pulse Selecting the dialing method.
*2 Tone
*1 Inside Selecting the printing position of the header.
Inside
2 Outside
Outside : Outside TX copy area.
No print : Header is not printed.
3 No print
*1 Logo, ID No. Selecting the header format.
2 From To
*1 Invalid Selecting whether the machine prints the received date &
time, remote ID, percentage of reduction and page number
2 Valid
on the bottom of each received page.
1 Off Selecting the volume of the Key/Buzzer tone.
*2 Soft
3 Loud
1 Off Selecting the home position of printout mode for COMM.
Journal Off/Always/INC.
2 Always
Off
Always
*3 Inc. Only
Inc. Only : Prints only when communication has failed.
1 Invalid Selecting whether the machine prints the journal
automatically after every 32 transactions.
*2 Valid
Customizing Your Machine
Comments
: Inside TX copy area.
: Does not print
: Always prints
77