Integrated Peripherals - MSI MS-6380 User Manual

Integrated Peripherals

FDC Function
This is used to enable or disable the onboard Floppy controller.
Option
Auto
Enabled
Disabled
Serial Port1/2
These items specify the base I/O port addresses of the onboard Serial Port 1
(COM A)/Serial Port 2 (COM B). Selecting Auto allows AMIBIOS to
automatically determine the correct base I/O port address. Settings: Auto,
3F8/COM1, 2F8/COM2, 3E8/COM3, 2E8/COM4 and Disabled.
Serial Port2 Mode
This item sets the operation mode for Serial Port 2. Settings: Normal,
1.6uS, 3/16 Baud and ASKIR (the last three operation modes are setting
Description
BIOS will automatically determine whether to enable the
onboard Floppy controller or not.
Enables the onboard Floppy controller.
Disables the onboard Floppy controller.
3-23
AMI BIOS Setup
®