MSI MS-6380 User Manual page 80

Chapter 3
CPU FSB/PCI Overclocking
This item is used to set the combination of CPU FSB (Front Side Bus) and
PCI bus frequency (MHz). Selecting By H/W will enable the CPU FSB to
follow the hardware configuration. If the installed CPU is 100MHz, you are
allowed to adjust the clock frequency from 100 to 120MHz. If the installed
one is 133MHz, you are allowed to bring its frequency down to
100~131MHz or adjust it up to 133~164MHz. The item makes
overclocking possible.
Note: Changing CPU FSB frequency could result in unstable system;
therefore, it is not recommended to change the default setting for
long-term purpose.
CPU Ratio/Vcore (V)
The items are used to adjust the CPU clock multiplier (ratio) and CPU core
voltage (Vcore). The items make overclocking possible.
Note: Changing CPU Ratio/Vcore could result in unstable system;
therefore, it is not recommended to change the default setting for
long-term purpose.
DDR Voltage (V)
The item is to adjust the DDR voltage to increase the DDR rate. Modifying
the setting may lead to unstable system, so changing the DDR Vcore for
long-term use is not recommended.
Chassis Intrusion
The field enables or disables the feature of recording the chassis intrusion
status and issuing a warning message if the chassis was opened. To clear
the warning message, set the field to Reset. The setting of the field will
automatically return to Enabled later. Settings: Enabled, Reset and
Disabled.
CPU Temperature/System Temperature/CPU Fan Speed/System Fan Speed/
Power Fan Speed/Vcore/Vtt/Vio/+5.000V/+12.000V/-12.000V/-5.000V/Bat-
tery/+5V SB
These items display the current status of all of the monitored hardware
devices/components such as system voltages, temperatures and fan speeds.
3-28