To Attach the Optional USB 2.0 Ports:
1. Take out the USB 2.0 bracket
2. Locate the JUSB1 and JUSB3 pin headers on the motherboard.
3. Connect the USB cables from USB 2.0 bracket to the JUSB1 and JUSB 3
connectors separately.
4. Place the USB 2.0 Bracket into the appropriate slot of the system case.
Note: The USB 2.0 controller is backwards compatible
with USB 1.1 spec. To use the USB 2.0 ports, you still
need to install USB 2.0 driver, which is supplied by
Microsoft for Windows
problems regarding USB 2.0 driver, please visit Microsoft
website for more information.
Connected to JUSB1 & JUSB3
Separately
USB 2.0 Bracket
®
2000 and XP. If you have any
2-25
Hardware Setup