PCI Interrupt Request Routing
The IRQ, abbreviation of interrupt request line and pronounced I-R-Q,
are hardware lines over which devices can send interrupt signals to the
microprocessor. To install a PCI expansion card on a PCI shared slot, you
must make sure the card's driver supports "IRQ shared" function or there is
no need to assign an IRQ to the device.
The "AGP/PCI/USB/Promise ATA100" IRQ pins are typically connected
to the PCI bus INTA#-INTD# pins as follows:
AGP
PCI Slot 1
PCI Slot 2
PCI Slot 3
PCI Slot 4
PCI Slot 5
NEC USB 2.0
Promise ATA 100 INT B#
The mainboard supports PCI Slot 1~5 Bus Master.
Order 1 Order 2 Order 3 Order 4
INT A# INT B#
INT A# INT B# INT C# INT D#
INT B# INT C# INT D# INT A#
INT C# INT D# INT A# INT B#
INT D# INT A# INT B# INT C#
INT A# INT B# INT C# INT D#
INT A# INT B# INT C#
2-31
Hardware Setup