Integrated Peripherals - MSI 875P Neo Manual

BIOS Setup

Integrated Peripherals

Please note that the options showed on your BIOS might be different
depending on the motherboard you buy.
USB Controller
This setting is used to enable/disable the onboard USB controllers.
USB Device Legacy Support
Set to All Device if your need to use any USB 1.1/2.0 device in the operating
system that does not support or have any USB 1.1/2.0 driver installed, such as
DOS and SCO Unix. Set to No Mice only if your wan t to use any USB device
other than the USB mouse. Setting options: Disabled, No Mice, All Device.
On-Chip IDE
Press <Enter> to enter the sub-menu and the following screen appears:
3-23