Removal Of The Master Board - Minolta Di152 Service Manual

Symbol Part Name
PWB-A Master Board
PWB-C Control Board
Paper Size Detecting
PWB-I
Board
PWB-J CCD Board
PWB-R1 Fusing Board
Pre-Image Transfer
PWB-R2
Board
PU1 DC Power Supply
PU2 Inverter Board
PU3 Control Panel
HV1 High Voltage Unit
Job Tray (JS-202): Option
Symbol Part Name
PWB-A Main Board
PWB-B Paper Detecting Board
Shifting Unit (OT-103): Option
Symbol Part Name
PWB-A Main Board
(1)

Removal of the Master Board

1. Remove the Rear Cover.
2. Remove 12 screws and the PWB Cover Assy.
Removal Procedure
D-10
D-11
Remove the Rear Cover. → Remove the PWB Assy. →
Remove two screws and the PWB-I Assy. → PWB-I
D-23
Remove the CCD Unit as a unit.
Remove the Fusing Unit. → PWB-R1
Open the Right Door. → PWB-R2
D-13
D-23
Remove two control panel mounting screws. → Remove
two ground wire mounting screws. → Remove one flat
cable and unplug one connector. → PU3
D-11
Removal Procedure
D-46
D-48
Removal Procedure
D-49
D-10