Feature Codes - 3Com VCX Manual

Feature Codes

*446
Then, either press Ok or press Feature + 120 to complete the command.
Some features require additional information. For example, if you want to enable call
forwarding when your telephone is busy, you must designate the extension to which you
want your calls forwarded. The feature code for Call Forward Busy is 467. To enable
this feature, you can use the Feature button or enter a single command (in the following
examples, the destination extension is 1001):
Use the Feature button:
Press Feature + 467.
The Display Panel displays the prompt
Enter the extension to which you want your calls forwarded, in this case, 1001.
Press OK or #.
Enter the feature code and extension with a single command:
*467*1001
You must prepend the feature code with an asterisk (*) and separate the feature
code and extension with another asterisk. Each element in a feature code
command must be prepended with an asterisk.
Some features occur within the bounds of an existing call, for example, forwarding a call
to the voice mail of another subscriber. In these cases, the feature requires using the
Transfer button. After pressing Transfer, you enter the transfer destination in the
format *feature_code*<destination>.
Table 5 lists the features that you can control with feature codes. Features are listed
alphabetically and include the required feature code syntax and, in most cases, a
reference for more information. In the syntax, the notation
variable that you must supply, for example, a telephone extension.
Table 5 VCX Feature Codes Alphabetical by Feature or Task
Feature
Anonymous
(Enable/Disable)
Anonymous Next
(Enable/Disable)
Barge In
FWD Busy Number
Feature Code Entry
Feature + 889
Or
*889
Feature + 890, then
<destination>
Or
*890*<destination>
Feature + 428
.
represents a
<parameter>
Description
See Controlling Caller ID
See Controlling Caller ID.
Used with Silent Monitor.
See Silent Monitor and
Barge In.