Mul Function Block; Table 5-46 Mul Dynamic Parameters - Honeywell UMC800 Reference Manual

5.37 MUL Function Block

Description
The MUL label stands for Multiplication Mathematical Operation (2 Inputs). This block is part of the
Math category. It looks like this graphically on the Control Builder.
Dynamic Parameters:
Parameter Index Type
status 0 REAL
OUT 1 REAL
X 2 REAL
Y 3 REAL
Static Configuration Parameters: None
8/99

Table 5-46 MUL Dynamic Parameters

Use R/W Description
C R block status (see section 5.2 for code list)
O R output
I R input 1
I R input 2
RS232 Communications Reference Manual
Function Parameter Index Reference
79