Alm Function Block; Table 5-7 Alm Dynamic Parameters; Table 5-8 Alm Static Configuration Parameters - Honeywell UMC800 Reference Manual

Function Parameter Index Reference

5.6 ALM Function Block

Description
The ALM label stands for the Analog Alarm function. This block is part of the Alarms/Monitor category.
It looks like this graphically on the Control Builder.
Dynamic Parameters:
Parameter Index Type
status 0 REAL
ack 1 BOOL
OUT 2 BOOL
PV 3 REAL
CV 4 REAL
RSP 5 REAL
DISABLE 6 BOOL
Static Configuration Parameters:
Parameter Index Type
lsp 0 REAL
rem_mode 1 BOOL
42
Table 5-7 ALM Dynamic Parameters
Use R/W
C R
C R/W
O R
I R
I R
I R
I R
Table 5-8 ALM Static Configuration Parameters
Description
local setpoint in eu {-99999.9 to 99999.9}
ON selects RSP
RS232 Communications Reference Manual
Description
block status (see section 5.2 for code list)
ON acknowledges the alarm
output
Process variable
Compare value
Remote setpoint
ON disables alarm action
8/99