Honeywell UMC800 Reference Manual page 134

Function Parameter Index Reference
use_rpm 33
sp_rate_dn 34
sp_rate_up 35
RATIO 37
LBIAS 38
devbar_hi 39
devbar_low 40
deadband 43
124
BOOL Use minutes (0) or repeats per minute (1) for integral constant
REAL
Set point low rate of change limit, 0 (off) to 99999 (eu/min)
REAL Set point high rate of change limit, 0 (off) to 99999 (eu/min)
REAL Gain value for Ratio PID (-20 to 20) (default 1) [ used when RA_BIAS
> 0]
REAL Bias value for Ratio PID when RA_BIAS = LOC_BIAS](-99999 to
99999) (0)
REAL High scale value for deviation bar graph (0 to 99999) (default 100)
REAL Low scale value for deviation bar graph [always = -devbar_hi]
REAL adjustable gap between forward and reverse motor operation (.5 to 5%)
RS232 Communications Reference Manual 8/99