Function Parameter Index Reference; Table 5-1 Function Block Look-Up Table; Parameter Index Numbers - Honeywell UMC800 Reference Manual

5. Function Parameter Index Reference

5.1 Parameter Index Numbers

Function Block parameter tables
Refer to the tables listed below to find the correct Dynamic (I/O) or Static (Configuration) parameter index
number for a given function block that is to be accessed through a communications message.
Abbreviations
The abbreviations used in the tables are:
REAL Floating Point Analog Numbers
BOOL Digital ON and OFF states
C Contained Parameter
I Input Value
O Output Value
R Read Only
R/W Read/Write
W Write
In this section
Refer to Table 4-1 for a listing of each function block type and respective reference page.
Function Block Type Identification Label
ABS (Absolute Value)
ADD (Addition 2 Inputs)
4ADD (Addition 4 Inputs)
AI (Analog Input)
ALM (Analog Alarm)
2AND (AND - 2 Inputs)
4AND (AND - 4 Inputs)
8AND (AND - 8 Inputs)
AMB (Auto/Manual Bias)
AO (Analog Output)
ASYS (Alarm System Monitor)
BCD (Binary Coded Decimal Translator)
BOOL (Free Form Logic)
CARB (Carbon Potential)
CMPR (Comparison)
DCMP (Deviation Compare)
8/99

Table 5-1 Function Block Look-up Table

RS232 Communications Reference Manual
Function Parameter Index Reference
See Subsection
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
5.10
5.11
5.12
5.13
5.14
5.15
5.16
5.17
35