Dcmp Function Block; Table 5-21 Dcmp Dynamic Parameters; Table 5-22 Dcmp Static Configuration Parameters - Honeywell UMC800 Reference Manual

5.17 DCMP Function Block

Description
The DCMP label stands for Deviation Compare. This block is part of the Calculations category. It looks
like this graphically on the Control Builder.
Dynamic Parameters:
Parameter Index Type
status 0 REAL
OUT 1 BOOL
IN1 2 REAL
IN2 3 REAL
IN3 4 REAL
IN4 5 REAL
IN5 6 REAL
IN6 7 REAL
REF(Y) 8 REAL
Static Configuration Parameters:

Table 5-22 DCMP Static Configuration Parameters

Parameter Index Type
+ DEV 0 REAL
- DEV 1 REAL
8/99

Table 5-21 DCMP Dynamic Parameters

Use R/W Description
C R block status (see section 5.2 for code list)
O R output
I R input 1
I R input 2
I R input 3
I R input 4
I R input 5
I R input 6
I R reference input
Description
plus deviation
minus deviation
RS232 Communications Reference Manual
Function Parameter Index Reference
57