Wtun Function Block; Table 5-97 Wtun Dynamic Parameters - Honeywell UMC800 Reference Manual

Function Parameter Index Reference

5.73 WTUN Function Block

Description
The WTUN label stands for Write Tuning Constants. This block is part of the Loops category. It looks
like this graphically on the Control Builder.
Dynamic Values
Parameter Index Type
status 0 REAL
GAIN 1 REAL
RSET 2 REAL
RATE 3 REAL
EN 4 BOOL
Static Configuration Values
None
128

Table 5-97 WTUN Dynamic Parameters

Use R/W Description
C R block status
I R proportional gain, 0.1 to 1000
I R integration time, 0.02 to 50 (minutes)
I R derivative time, 0.1 to 10 (minutes)
I R enable
RS232 Communications Reference Manual 8/99