Wan Commands - Motorola Netopia 2200 Series User Manual

SHELL Commands
•
The hostname argument is the name of the device to which you want to connect; for
telnet ftp.netopia.com
example,
•
The ip_address argument is the IP address, in dotted decimal notation, of the device
to which you want to connect.
•
The port argument is the number of t he port over which you want to open a telnet
session.
traceroute ( ip_address | hostname )
Traces the routing path to an IP destination.
upload [ server_address ] [ filename ] [confirm]
Copies the current configuration settings of the Motorola Netopia® Gateway to a TFTP (Triv-
ial File Transfer Protocol) server. The TFTP server must be accessible on your Ethernet net-
work. The server_address argument identifies the IP address of the TFTP server on
which you want to store the Motorola Netopia® Gateway settings. The filename argu-
ment identifies the path and name of the configuration file on the TFTP server. If you
include the optional confirm
you want to perform the operation.
view config
Dumps the Motorola Netopia® Gateway's configuration just as the
in config mode.
who
Displays the names of the current shell and PPP users.

WAN Commands

atmping vccn [ segment | end-to-end ]
Lets you check the ATM connection reachability and network connectivity. This command
sends five Operations, Administration, and Maintenance (OAM) loopback calls to the speci-
fied vpi/vci destination. There is a five second total timeout interval.
.
keyword, you will not be prompted to confirm whether or not
view command does
185