Upnp Settings - Motorola Netopia 2200 Series User Manual

CONFIG Commands
set voip phone: 1 sip-advanced-setting sip-dtmf-mode rfc2833
set voip phone: 1 sip-advanced-setting sip-end-of-dial-marker off
set voip phone: 1 sip-advanced-setting call-feature call-forwarding-all-
option off
set voip phone: 1 sip-advanced-setting call-feature call-forwarding-on-busy-
option off
set voip phone: 1 sip-advanced-setting call-feature call-forwarding-on-no-
answer-option off
set voip phone: 1 sip-advanced-setting call-feature call-waiting-option off
set voip phone: 1 sip-advanced-setting call-feature call-conferencing-option
off
set voip phone: 1 sip-advanced-setting call-feature subscribe-do-not-
disturb-option off
set voip phone: 1 sip-advanced-setting call-feature subscribe-mwi-option off
set voip phone: 1 sip-advanced-setting dsp-settings echo-option echo-on-cng-
nlp
set voip phone: 1 sip-advanced-setting dsp-settings echo-start-attenuation
8192
set voip phone: 1 sip-advanced-setting dsp-settings echo-max-attenuation
16384
set voip phone: 1 sip-advanced-setting dsp-settings echo-tail-length 0
set voip phone: 1 sip-advanced-setting dsp-settings vad-option off

UPnP settings

set upnp option [ on | off ]
PCs using UPnP can retrieve the Gateway's WAN IP address, and automatically create NAT
port maps. This means that applications that support UPnP, and are used with a UPnP-
enabled Motorola Netopia® Gateway, will not need application layer gateway support on
the Motorola Netopia® Gateway to work through NAT. The default is on.
You can disable UPnP, if you are not using any UPnP devices or applications.
set upnp log [ off | on ]
Enables or disables UPnP logging.
set upnp read-only [ off | on ]
Enables or disables
301