Voip Settings - Motorola Netopia 2200 Series User Manual

VoIP settings

(supported models only)
Voice-over-IP (VoIP) refers to the ability to make voice telephone calls over the Internet. This
differs from traditional phone calls that use the Public Switched Telephone Network
(PSTN). VoIP calls use an Internet protocol, Session Initiation Protocol (SIP), to transmit
sound over a network or the Internet in the form of data packets. Certain Motorola Neto-
pia® Gateway models have two separate voice ports for connecting telephone handsets.
These models support VoIP. If your Gateway is a VoIP model, you can configure the VoIP
features.
set voip phone [ 0 | 1 ] sip-option [ off | on ]
Turns SIP on or off for the specified phone. Default is off.
set voip phone [ 0 | 1 ] sip-proxy-server [ server_name | ip_address ]
Specifies the SIP proxy server for the specified phone by fully qualified server name or IP
address.
set voip phone [ 0 | 1 ] sip-proxy-server-domain domain_name
Specifies the SIP proxy server domain name or IP address for the specified phone.
set voip phone [ 0 | 1 ] sip-proxy-server-transport [ UDP | TCP | TLS ]
Specifies the SIP proxy server transport protocol for the specified phone. Default is UDP.
set voip phone [ 0 | 1 ] sip-registrar-setting sip-registrar-server
[ server_name | ip_address ]
Specifies the SIP registration server for the specified phone by fully qualified server name
or IP address.
set voip phone [ 0 | 1 ] sip-registrar-setting
sip-registrar-server-transport [ UDP | TCP | TLS ]
Specifies the SIP registration server transport protocol for the specified phone. Default is
UDP.
294