Motorola Netopia 2200 Series User Manual page 268

set snmp v3 rw-account security-name string
Adds the specified 1 – 32 character name string as the name of the Read-Write user.
set snmp v3 rw-account security-model [ none | auth | auth+priv ]
Sets the security model for the Read-Write account: none, authentication, or authentication
plus privacy.
•
none specifies no authentication or encryption;
• auth (authentication, no encryption) requires a security name and authentication pass-
word, and a specified authentication protocol;
•
auth+priv (authentication plus privacy DES encryption) requires authentication plus a
privacy password.
set snmp v3 rw-account auth-protocol [ md5 | sha ]
Specifies the authentication protocol for the Read-Write account: md5 (HMAC-MD5 authen-
tication) or sha (HMAC-SHA authentication), if the security model is set to auth or
auth+priv.
set snmp v3 rw-account auth-password
Specifies the authentication password, a 1 – 32 character string, for the Read-Write
account, if the security model is set to auth or auth+priv. You are prompted for a new
password and then to repeat the password. If there is an existing password, the user must
enter the old password, then the new password, and repeat it.
set snmp v3 rw-account priv-password
Specifies the privacy password, a 1 – 32 character string, for the Read-Write account, if the
security model is set to auth+priv. You are prompted for a new password and then to
repeat the password. If there is an existing password, the user must enter the old pass-
word, then the new password, and repeat it.
set snmp v3 rw-account localize-keys [ off | on ]
Determines whether or not the generated keys should be localized (hashed) with the
Engine ID for the Read-Write account, if the security model is set to auth+priv.
268