Motorola Netopia 2200 Series User Manual page 83

Links Bar
• Subnet Mask: Specifies the subnet mask of the Router itself. Defaults to the common
Class C subnet.
• DHCP Start Address: Specifies the first address in the DHCP address range. You can
reserve a sequence of up to 253 IP addresses (including up to 64 IP addresses for
wireless clients) within a subnet, beginning with the specified address, for dynamic
assignment.
DHCP End Address: Specifies the last address in the DHCP address range.
•
• DHCP Lease: Specifies the default length for DHCP leases issued by the Router. Enter
lease time in dd:hh:mm:ss (days/hours/minutes/seconds) format.
DHCP Server Enable: Uncheck this setting if you already have a DHCP server on your
•
LAN. This enables the DHCP server in this Router.
Additional IP Subnets
The Additional IP Subnets screen allows you to configure up to seven secondary subnets
and their DHCP ranges, by entering IP address/subnet mask pairs:
☛
Note:
You need not use this screen if you have only a single Ethernet IP subnet.
This screen displays seven rows of editable columns. All seven row labels are always visi-
ble, regardless of the number of subnets configured.
•
To add an IP subnet, select one of the rows, and click the
Edit
button.
83