VLAN Settings
You can create up to 8 VLANs, and you can also restrict any VLAN, and the computers on it,
from administering the Gateway. See
"VLAN" on page 106
for more information.
set vlan name name
Sets the descriptive name for the VLAN. If no name is specified, displays a selection list of
node names to select for editing. Once a new VLAN name is specified, presents the list of
VLAN characteristics to define.
set vlan name name type [ by-port | global ]
Specifies VLAN type: by-port or global. Default is by-port.
set vlan name name id VID
Specifies VLAN id (VID), when type is set to global. The numerical range of possible VIDs
is 1 - 4094. (A VID of zero (0) is permitted on the Ethernet WAN port only.)
set vlan name name admin-restricted [ off | on ]
Turns admin-restricted off or on. Default is off. If you select on, administrative access to
the Gateway is blocked from the specified VLAN.
set vlan name name seg-pbits [ 0 - 7 ]
Specifies the 802.1p priority bit. If you set this to a value greater than 0, all packets of this
VLAN with unmarked priority bits (pbits) will be re-marked to this priority.
set vlan name name ports port option [ off | on ]
Enables or disables the Gateway's physical Ethernet, USB or VCC port or wireless SSID for
the specified VLAN.
288