Motorola Netopia 2200 Series User Manual page 305

Motorola netopia 2200-, 3300- or 7000-series gateway user guide
Hide thumbs Also See for Netopia 2200 Series:
Table of Contents

Advertisement

CONFIG Commands
set backup ping-host [ 1 | 2 ] [ name hostname | ip-address
ip_address ]
Specifies an IP address or resolvable DNS name for the Gateway to ping.
set backup auto-recovery [ off | on ]
Turns automatic recovery off or on. Default is off.
set backup recovery-timeout [ 1 - 10 ]
If auto-recovery is set to on, specifies the number of minutes for the system to wait
before attempting to switch back to the WAN connection. This allows you to be sure that
the WAN connection is well re-established before the gateway switches back to it from the
backup mode. Default is 1.
set ip backup-gateway option [ on | off ]
Turns the backup gateway option on or off. Default is off.
set ip backup-gateway interface ip-address
Specifies the backup gateway interface ip address to which you want to direct the backup
connection.
set ip backup-gateway default ip_address
Specifies the ip address of the default gateway.
305

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netopia 3300 seriesNetopia 7000 series2200

Table of Contents