Setting Date And Time - Kyocera KM-3050 Operation Manual

Preparation before Use

Setting Date and Time

2-8
Follow the steps below to set date and time in the place of installation.
When you send an E-mail using the transmission function, the date and
time of this setting will be printed in the header of E-mail message. Set the
date, time and time difference from GMT of the region where the machine
is used.
NOTE:
Be sure to set the time difference before setting date and time.
1
Turn on the main power
switch.
2
Press the System Menu key.
3
Press [ ], [Date/Timer] and then [Change] of Time Zone.
4
Select the region
and press [OK].
NOTE:
Press [ ] or [ ] to view next region.
5
Press [Change] of Date/Time.
Date/Timer - Time Zone
Set time zone.
Please select the location nearest you.
Time Zone
-12:00 Eniwetok
-11:00 Midway Is
-10:00 Hawaii
-09:00 Alaska
-08:00 Pfic Time
-07:00 Arizona
Status
1/13
Cancel
OK
10/5/2006 10:10
OPERATION GUIDE