Kyocera KM-3050 Operation Manual page 95

Send to Folder (SMB)
OPERATION GUIDE
7
Press [OK]. The destinations are registered in the destination list.
8
Check the destination list.
Select a destination and press [Detail/Edit] to check and edit it. Refer to the
steps 4 and 5 to edit the destination as necessary.
Select a destination
and press [Delete] to
remove the
destination from the
list.
9
Change the original size, scan resolution, etc. if necessary.
10
Press the Start key. The
scanned original is sent to the
specified E-mail address.
Stores a scanned original image file in the specified shared folder of any PC.
NOTE:
Be sure that SMB Protocol of COMMAND CENTER is On. Refer
to Enabling SMB Function on page 2-17.
1
Place the originals on the
platen or in the optional
document processor.
NOTE:
For loading instructions, refer to Loading Originals on page 2-40.
Ready to send.
Place original.
Destination
abc@defg.com
ABC
Chain Detail/Edit Delete
001 002 003
AAA BBB CCC DDD
006 007 008
FFF GGG HHH III
Destination Quick Setup Type of Original/
Transmission
Status
Basic Operation
Destination
Detail
Address
Book
To:
E-mail
Addr Entry
Folder Path
Entry
Recall
004 005 No.
EEE
009 010 1/10
JJJ
Color/Image Advanced
Setup
10/5/2006 10:10
3-21
1