Cooling System; Checking The Antifreeze And Coolant Level - Husqvarna FE 350 EU Owner's Manual

16

COOLING SYSTEM

16.1 Cooling system
16.2

Checking the antifreeze and coolant level

Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not remove the radiator cap, radiator hoses or other cooling system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse immediately with lukewarm water.
Warning
Danger of poisoning Coolant is poisonous and a health hazard.
–
Coolant must not come into contact with the skin, eyes, or clothing. If contact occurs with the eyes, rinse with water imme-
diately and contact a physician. Immediately clean contaminated areas on the skin with soap and water. If coolant is swal-
lowed, contact a physician immediately. Change clothing that is contaminated with coolant. Keep coolant out of reach of chil-
dren.
The water pump
The pressure resulting from the warming of the cooling system is regulated by a valve in
radiator cap
2
danger of malfunctions.
120 °C (248 °F)
Cooling is effected by the air stream.
The lower the speed, the less the cooling effect. Dirty cooling fins also reduce the cooling
effect.
The radiator fan provides extra cooling. It is controlled by a thermoswitch.
B01782-10
Condition
The engine is cold.
–
Stand the motorcycle upright on a horizontal surface.
–
Remove the radiator cap.
–
Check antifreeze of coolant.
−25... −45 °C (−13... −49 °F)
» If the antifreeze of the coolant does not meet specifications:
–
Correct the antifreeze of the coolant.
–
Check the coolant level in the radiator.
400243-10
Coolant level
» If the coolant level does not meet specifications:
–
Correct the coolant level.
Alternative 1
Alternative 2
–
Mount the radiator cap.
in the engine forces the coolant to flow.
1
. The specified coolant temperature is therefore permissible without the
above radiator fins.
A
Coolant ( p. 108)
Coolant (mixed ready to use) (
10 mm (0.39 in)
p. 108)
86