Cooling System 16 - Husqvarna VITPILEN 401 2020 Owner's Manual

Table of Contents

Advertisement

16.1
Cooling system
1
Water pump
coolant.
The pressure resulting from the warming of the cooling system is
regulated by a valve in radiator cap
excess coolant to flow into compensating tank
temperature falls, this surplus coolant is sucked back into the
cooling system. This ensures that operating the vehicle at the
specified coolant temperature will not result in a risk of malfunc-
tions.
E01307-11
110 °C (230 °F)
The coolant is cooled by the air stream and a radiator fan
which is activated at high temperature.
The lower the speed, the less the cooling effect. Dirty cooling fins
also reduce the cooling effect.
Info
If the cooling system overheats, the maximum engine
speed is limited.
H02680-10

COOLING SYSTEM 16

in the engine ensures forced circulation of the
2
. Heat expansion causes
3
. When the
4
,
199

Advertisement

Table of Contents
loading

Table of Contents