Horn Button (Fe 350 Eu, Fe 350 Aus); Light Switch (Fe 350 Eu, Fe 350 Aus); Light Switch (Fe 350 Usa); Turn Signal Switch (Fe 350 Eu, Fe 350 Aus) - Husqvarna FE 350 EU Owner's Manual

6 CONTROLS
6.6

Horn button (FE 350 EU, FE 350 AUS)

6.7

Light switch (FE 350 EU, FE 350 AUS)

6.8

Light switch (FE 350 USA)

6.9

Turn signal switch (FE 350 EU, FE 350 AUS)

6.10

Emergency OFF switch (FE 350 AUS)

The horn button
Possible states
• Horn button
• Horn button
C00590-11
The light switch
Possible states
C00590-12
The light switch
Possible states
Light off – Light switch is pressed in up to the stop. In this position, the light is
•
switched off.
Light on – Light switch is pulled out to the stop. In this position, the low beam and
•
tail light are switched on.
B01648-10
Turn signal switch
Possible states
C00591-10
The emergency OFF switch
Possible states
C00592-10
is fitted on the left side of the handlebar.
1
in neutral position
pressed – the horn is actuated in this position.
is fitted on the left side of the handlebar.
1
Light off – Light switch is turned to the right. In this position, the light is
switched off.
Low beam on – Light switch is in the central position. In this position, the
low beam and tail light are switched on.
High beam on – Light switch is turned to the left. In this position, the high
beam and the tail light are switched on.
is on the left of the speedometer.
1
is fitted on the left side of the handlebar.
1
Turn signal light off – Turn signal switch is in the central position.
Turn signal light, left, on – Turn signal switch is turned to the left.
Turn signal light, right, on – Turn signal switch is turned to the right.
is fitted on the right side of the handlebar.
1
Ignition off – the ignition circuit is open in this position, the engine goes
out if it was running, or does not start if it was off.
Ignition on – the ignition circuit is closed in this position and the engine
can be started.
15