Kill Switch (Te Us); Horn Button (Te Eu/Au); Light Switch (Te Eu/Au); Light Switch (Te Us) - Husqvarna TE 125 EU 2015 Owner's Manual

6 CONTROLS
6.5

Kill switch (TE US)

6.6

Horn button (TE EU/AU)

6.7

Light switch (TE EU/AU)

6.8

Light switch (TE US)

6.9

Turn signal switch (TE EU/AU)

The kill switch
Possible states
• Kill switch
engine can be started.
• Kill switch
engine stops, and a non-running engine will not start.
B01827-10
The horn button
Possible states
• Horn button
• Horn button
M00352-11
The light switch
Possible states
M00352-12
The light switch
Possible states
Light off – Light switch is pressed in up to the stop. In this position, the light is
•
switched off.
Light on – Light switch is pulled out to the stop. In this position, the low beam and
•
tail light are switched on.
M00355-10
The turn signal switch
Possible states
M00353-10

is fitted on the left side of the handlebar.
in basic position – In this position, the ignition circuit is closed and the
is pressed – In this position, the ignition circuit is interrupted, a running

is fitted on the left side of the handlebar.
in neutral position
pressed – The horn is operated in this position.

is fitted on the left side of the handlebar.
Light off – The light switch is turned to the right. In this position, the light
is switched off.
Low beam on – The light switch is in the central position. In this position,
the low beam and tail light are switched on.
High beam on – The light switch is turned to the left. In this position, the
high beam and the tail light are switched on.

is on the left of the speedometer.
 is fitted on the left side of the handlebar.
Turn signal light off – The turn signal switch is in the central position.
Left turn signal on – The turn signal switch is turned to the left.
Right turn signal on – The turn signal switch is turned to the right.
15