9.0 Control Functions; Control Panel - Jacuzzi J - 400 SERIES J - 460 Owner's Manual

J-400 Series

9.0 Control Functions

9.1

Control Panel

a. select
Button: Filter
cycle programming
features. Pressing
the select button
also allows you
to turn on/off the
circulation pump,
when it is in an off state.
If the circulation pump
was turned on automatically, it cannot be manually turned off.
B. Cycle
cycle.
C. mode
filtration/heating modes sections.
D. Display
and locking functions.
e. Invert
F. warmer
increase or decrease the temperature. They also display other
programmable features.
G. light On/Off
on in unison. Press once for high intensity; press a second time for
medium intensity; press a third time for low intensity; press a fourth
time to turn off. The displayed color is changed using the light mode
button (H) below.
H. light mode
footwell, and logo lights. See page 27 for additional information.
I. JeTs 1
J. JeTs 2
Page 20
A
Display shown for example purposes only,
actual water temperature will vary.
Button: Accesses filter cycle program mode and next
Button: Switches between standard and economy
Button: Displays time of day and initiates time setting
Button: Inverts the main 4-digit LCD display.
and Cooler
Button: Turns waterfall, footwell and logo lights
Button: Selects one of 4 color modes for waterfall,
Button: Controls jets pump #1 (On, Off).
Button: Controls jets pump #2 (On, Off).
D
C
B
F
Buttons: Press these to display,
E
AM
PM
STANDARD
I
H
G
J