Flash Programming; Programming Internal Flash Of The Mb91F467D - Fujitsu SK-91F467D-208PFV User Manual

6 Flash Programming

6.1 Programming internal Flash of the MB91F467D

To program the Softune Workbench Monitor Debugger or any other Application into the
internal Flash memory of MB91F467D following steps must be taken.
1) To install the flash programming tool on the PC the following steps must be taken
a. Browse to the folder "Software\FlashProgramming" of the Starterkit CD-ROM
and execute the FME_FR_Flashprogrammer_v3_7.exe file. The default
installation folder is: C:\Softune6\Utility\
b. Start the flash programming tool by double click flash.exe within the installed
folder: C:\Softune6\Utility\FME_FlashProgrammer_v3_7\flashprg.exe
2) Open the flash programming tool by double click the flashprg.exe file
3) Select CPU type, COM Port, baud rate, Hex File as shown in the following figure
a. Device Type: MB91F467D
b. Com Port:
c. Baudrate: 38400
d. Hex File: MonDeb91467D.mhx
Use button "Browse" and open
c:\..\Software\MonitorDebugger\ MonDeb91467D.mhx
a
6
Figure 6-1: FME FR-Flash Programmer for MB91F467D series
© Fujitsu Microelectronics Europe GmbH
SK-91F467D-208PFV V1.1
Flash Programming
1
- 51 -
c
d
FMEMCU-UG-910014-10