Features - Fujitsu SK-91F467D-208PFV User Manual

1.2 Features

•
Supports 32-bit Flash microcontroller MB91F467D
•
9-12V (2000 mA) unregulated external DC power supply
•
5V, 3.3V, 2.5V and 1.8V on-board switching regulators with power status LEDs
•
Triple supply monitor to watch 5V, 3.3V and selectable 2.5V or 1.8V
•
On-board Memory:
o 32 Mbit (4 MByte) SRAM
o 128 Mbit (16 MByte) Flash
•
All microcontroller resources available for evaluation
•
All microcontroller pins routed to pin header
•
In-Circuit serial Flash programming
•
Three selectable RS-232 or LIN UART-interfaces
•
Three High-Speed CAN interfaces
•
16 User LEDs
•
optional: alphanumeric standard LC-Display connectable
•
Reset button, Reset LED
•
4 User buttons, one 8 bit MCU port can be connected to DIP switches
•
External bus interface routed to 96pin and 48pin DIN 41612 (VG) connectors
This board must only be used for test applications
in an evaluation laboratory environment.
FMEMCU-UG-910014-10
SK-91F467D-208PFV V1.1
Introduction
- 8 - © Fujitsu Microelectronics Europe GmbH