Fujitsu SK-91F467D-208PFV User Manual page 21

Jumper
JP15
JP16
JP18
Default: grey
*1
By default the resistor network (R10 and R13) is not assembled on the board
Note:
If JP15 or JP18 are open, the user has to supply an adequate analogue voltage supply (AVcc
and AVss) to the A/D-converter.
If JP16 is open, the potential divider comprising resistors R10 and R13 define AVRH.
© Fujitsu Microelectronics Europe GmbH
SK-91F467D-208PFV V1.1
Jumpers and Switches
Setting Description
ON (closed) AVcc is connected to MCUVcc
OFF (open) AVcc is disconnected
ON (closed) AVRH is connected to AVcc
OFF (open) AVRH defined by resistor network
ON (closed) AVss is connected to GND
OFF (open) AVss is disconnected
Table 3-6: MCU ADC Supply
- 21 -
*1
FMEMCU-UG-910014-10