Can Connector (X9, X10, X11) - Fujitsu SK-91F467D-208PFV User Manual

4.3 CAN Connector (X9, X10, X11)

Three 9-pin D-Sub male connectors are used for the CAN interfaces CAN0, CAN1 and
CAN2.
Pin Number Pin Signal
1 NC
2 CANL
3 GND
4 NC
5 NC
6 NC
7 CANH
8 NC
9 NC
Shield GND
FMEMCU-UG-910014-10
SK-91F467D-208PFV V1.1
Connectors
Figure 4-3: CAN Connector
Description
Not used
LOW-level CAN voltage input/output
Ground
Not used
Not used
Not used
HIGH-level CAN voltage input/output
Not used
Not used
Ground
Table 4-2: CAN Connector Signals
- 30 - © Fujitsu Microelectronics Europe GmbH