Epson Stylus CX7300 Service Manual page 24

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C
Printer
Button
Status
Paper Type Normal Sets the paper size / paper type.
Default is A4 (Letter for EAI), Plain Paper
Saves the settings when the power is turned Off by the Power
button, the modes is changed, or copying is started. Does not
save when the power plug is disconnected.
Error Disabled
Start B&W Normal Starts copying in B&W mode.
Saves the number of copies and paper type and size settings
when starting copying and displays the saved settings after the
copying is complete.
Error • When a paper-out error is occurring, performs paper feed
operation. If the paper is fed successfully, cancels the error
and starts the copy job.
• When a paper jam error is occurring, performs paper
ejection operation. If the paper is ejected successfully,
cancels the error starts the copy job.
Start B&W Normal Starts autofit copying in B&W mode.
(when pressed for 3 Saves the number of copies and paper type and size settings
seconds or more) when starting copying and displays the saved settings after the
copying is complete.
Error • When a paper-out error is occurring, performs paper feed
operation. If the paper is fed successfully, cancels the error
and starts the copy job.
• When a paper jam error is occurring, performs paper
ejection operation. If the paper is ejected successfully,
cancels the error starts the copy job.
Stop /Maintenance Normal Starts monochrome draft copy. (A4 plain paper only)
+ Start B&W
Saves the number of copies and paper type and size settings
when starting copying and displays the saved settings after the
copying is complete.
Error Disabled
Note * : When in camera direct mode, starts printing according to requirements from the camera.
PRODUCT DESCRIPTION
Table 1-19. CX7300/TX200 series Buttons & LEDs Functions
During Normal Printing
Functions
During DPOF
During Camera Direct Printing
Printing
Same as the left column. Same as the left column.
Disabled When a camera direct error is occurring,
cancels the error, and goes to the standby
mode. The set number of copies is returned to
the default, and the paper type and size
settings are returned to the previous ones.
Disabled Disabled*
Same as the left column. Same as the left column.
Disabled Disabled*
Same as the left column. Same as the left column.
Disabled Disabled*
Disabled Disabled
Control Panel
Button Operation Disabled Cases
• During printing
• During scanner operation
• During head cleaning
• During ink cartridge replacement
• When an error is occurring
• When print data is spooled
• When printing is being stopped or a
print job is being canceled
• During printing
• During scanner operation
• During head cleaning
• During ink cartridge replacement
• When an ink error is occurring
• When print data is spooled
• When printing is being stopped or a
print job is being canceled
• During scanner operation
• During head cleaning
• During ink cartridge replacement
• When printing is being stopped or a
print job is being canceled
• When an error is occurring
Continued on next page
24
Confidential