Pf Band Adjustment; Bottom Margin Adjustment - Epson Stylus CX7300 Service Manual

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

5.2.6 PF Band Adjustment

The following pattern is printed.
1
2
3
Figure 5-10. PF Band Adjustment Printout Pattern
How to Judge
Examine the printout patterns and enter the value for the pattern with no overlap and
gap between the two rectangles.
Additional Information
When overlap and gap are observed in the all patterns, enter the value for the best one,
and print the adjustment pattern again.
Example for judgement
C H E C K
P O I N T
NG
ADJUSTMENT
1
2
3
NG OK
Using the Adjustment Program

5.2.7 Bottom Margin Adjustment

The following pattern is printed.
-3 -2 -1
Figure 5-11. Bottom Margin Adjustment Printout Pattern
How to Judge
Measure the length from the bottom edge of the paper to the printed line. Enter the
value for the line that is exactly 5 mm away from the bottom edge.
0 1 2 3
5mm
Confidential
150