Epson Stylus CX7300 Service Manual page 149

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C
3. Input the selected value for each of the top and bottom in the program, and
print a PF adjustment check pattern.
ADJUSTMENT
PF- for bottom margin area
The following pattern is printed.
Upper pattern
2
Lower pattern
Figure 5-9. PF (bottom margin area) Adjustment Printout Pattern
How to Judge
Examine the printout patterns, and enter the value for the pattern with no overlap and
gap between the upper and lower ones.
Additional Information
When overlap and gap are observed in the all patterns, enter the value for the best one,
and print the adjustment pattern again.
Example for judgement
C H E C K
P O I N T
Using the Adjustment Program
3 4 5 6 7
Gap
Overlap
NG OK NG
8
149
Confidential