Automatic Keyguard Setting; Dtmf Tones Setting; Start-Up Tone Setting; Switch Off Tone Setting - Sonim XP STRIKE IS User Manual

The memory usage of the phone and SD card is displayed.

Automatic Keyguard Setting

Follow the instructions below to enable or disable the Automatic Keypad lock.
1. Select Menu (left selection key) > Settings > Phone settings > Automatic keyguard.
2. Highlight On or Off and press Select (menu key).

DTMF Tones Setting

Follow the instructions below to set the DTMF tone type and tone length.
► Select Menu (left selection key) > Settings > Phone settings > DTMF Tones.

Select Manual touch tones to set the DTMF tone to Continuous, Fixed, or Off.

Select Touch tone length to set the DTMF tone length to Short or Long.

Start-up Tone Setting

Follow the instructions below to enable or disable the pre-defined tone that plays upon powering
on the phone.
1. Select Menu (left selection key) > Settings > Phone settings > Start-up tone.
2. Highlight On or Off and press Select (menu key).

Switch Off Tone Setting

Follow the instructions below to enable or disable the pre-defined tone that plays upon powering
off the phone.
1. Select Menu (left selection key) > Settings > Phone settings > Switch off tone.
2. Highlight On or Off and press Select (menu key).

Welcome Note Setting

Follow the instructions below to display a customized welcome note whenever the phone is
powered on.
1. Select Menu (left selection key) > Settings > Phone settings > Welcome note.
2. Type out your desired welcome note and press Save (menu key).

Hearing Aid Compatibility (HAC) Rating

The FCC has created a rating system for cellular phones regarding their HAC-related
performance. This rating helps consumers with hearing disabilities to find phones that will work
well with their hearing aid devices. The HAC rating and measurement procedure are described
in the American National Standards Institute (ANSI) C63.19:2007.
Settings 78