Tone Settings; Date And Time - Sonim XP STRIKE IS User Manual


Screen saver: Activate the screen saver to appear on the idle screen. The user can
select the screensaver image.

Screen save mode: Set the phone idle time to activate the Screen Saver if the
phone is idle for specific time.

Backlight level: Select the brightness level for the backlight of the screen.

Backlight time-out: The screen display is active for the set time period.

Tone Settings

Follow the instructions below to set the tone for incoming calls, messages, and keypad.
► Select Menu (left selection key) > Settings > Tone settings. Modify the desired options.

Incoming call alert: Set the alert type for incoming calls. You can select Off,
Ringing, Ascending, Ring once, or Beep once.

Ring tone: Set the tone for incoming calls.

Ring volume: Set the volume for the ringtone.

Vibrating alert: Enable or disable vibrating alerts for incoming calls.

Message alert tone: Set the alert tone for incoming messages to a pre-defined alert
tone, a tone from your My Stuff folder, or none (silent).

Keypad tones: Set the volume of the keypad tone.

Java App. Volume: Enable or disable audible tones when applications are running.
Note: You can download and store ring tones over Bluetooth or WAP. These ring tones will be
stored in My files or My Stuff. The supported ringtone formats are MIDI, MP3, WAV, AAC and
AMR.

Date and Time

Follow the instructions below to set the date and time displayed on the phone and/or change its
format.
► Select Menu (left selection key) > Settings > Date and time > Date & time settings.
In this menu, you can edit the date, time, time zone, and the daylight saving time hours.
Note: The date and time cannot be manually changed if Auto-update is enabled.
Note: You can download and store ring tones over Bluetooth or WAP. These ring tones will be
stored in My files or My Stuff. The supported ringtone formats are MIDI, MP3, WAV, AAC and
AMR.
Settings 76