Group Call Options; Headset Mode - Sonim XP STRIKE IS User Manual

6. Select Allowed DC numbers.
numbers list from Call log, Contacts, Alert history.

To add a number to the allowed numbers, select Options (left selection key) > Add
number and select either Contacts to select a number from your contacts or Input
Manually
If the Contact has both Mobile+DC and DC only numbers
added to the allowed numbers list.

To remove a number from the allowed numbers, highlight the desired number and
select Options (left selection key) > Delete.

To delete all the numbers from the allowed numbers, select Options (left selection
key) > Delete all.
Note: Before calling a DC number you must add it to the list of allowed numbers using one of
the following options:

Select Call log > highlight the desired DC number > Options (left selection key) >
Allow DC call.

Select Contacts > All contacts > highlight the desired DC number > Options (left
selection key) > Allow DC call.

Select History > Alert history >highlight the desired DC number > Options (left
selection key) > Allow DC call.

Group Call Options

View and edit the Direct Connect group call settings.
Follow the instructions below to view and modify the group call options.
► Select Menu (left selection key) > Settings > DC Settings > Group Call
The following options are displayed:
 Allow the call to continue – If the Direct Connect group call initiator ends the call,
the other members can continue the call.
 End the call for everyone – If the Direct Connect group call initiator ends the call,
the group call will be stopped.

Headset Mode

In headset mode you can press the button on your Qchat supporting headset to make a voice
call or DC call.
Follow the instructions below to view and modify the headset mode options.
Sprint Direct Connect
User can add and remove DC numbers in Allowed DC
to enter a unsaved DC number
.
select the required number to be
28
Options.