Answer Or Reject Direct Connect Calls; End A Direct Connect Call; Call Alerts - Sonim XP STRIKE IS User Manual

Answer or Reject Direct Connect Calls

When you receive a Direct Connect call, you hear an incoming tone or the phone vibrates. The
Direct Connect number or the caller's name (if available) is displayed. You may also hear the
caller's voice through the speakerphone. By default for Direct Connect calls, the speakerphone
is activated. You can turn the speakerphone off and listen to Direct Connect calls through the
earpiece as you would a regular call, or you can listen through a headset.
Follow the instructions below to answer a Direct Connect call:
1. Press Handset/Loudsp. (right selection key) to enable or disable the Direct Connect
speakerphone feature.

If you enable the Direct Connect speakerphone, you will hear the caller's voice
through the speakerphone on the front of the phone.

If you disable the Direct Connect speakerphone, you will only hear the caller's voice
through the earpiece.
2. When the caller has finished speaking, you will hear a tone.
3. Press and hold the DC button and wait for a tone to sound and a message (Me) to
appear onscreen before you begin talking. Release the DC button when you have
finished talking.
4. Press the Red button (End call button) to disconnect.
To reject a Direct Connect call, press the Red button (End call button).

End a Direct Connect Call

You can end a Direct Connect call using one of the methods below.
► The call will automatically end after several seconds if neither party presses the DC
button.
– or –
Press the Red button (End call button) to disconnect.

Call Alerts

Call Alerts let you notify others that you want to communicate with them using Direct Connect.
When a user receives a Call Alert, the phone sounds a tone and displays your name or Direct
Connect number.
Sprint Direct Connect 33