Peel-Off Module Installation (Option) - AMT Datasouth Fastmark M5 Plus Series User Manual

3.6 Peel-off Module Installation (Option)

1. Open the top cover and remove the front panel from the printer.
Front Panel
2. Lift and hold the top cover while pushing down and sliding the cover support
arm backwards to release.
3. Use a screwdriver to remove 6 screws on the lower inner cover.
Screws
Lower Inner
Cover
Fig. 13 Remove 6 screws from lower inner cover
Document #120522 Rev-A
Fig. 12 Remove the front panel
Screws
Lower Cover
12
Top Cover
Top Cover Support Arm
Flute