Step 2 Setting Up The Hardware Connection - EverFocus EAN600 User Manual

EAN600
After you fill value numbers, and please click "OK" button. That will complete
"Internet Protocol (TCP/IP) Properties" configuration. After Please click
"OK" button of Local Area Connection Properties.

Step 2 Setting up the Hardware connection.

Use a cross-over cat.5 cable to connect to your local PC.
Ethernet [RJ-45] Connect to your PC
A "Y Cable" Connect to AC Adapter,
Please pay attention to "+" and "-"
Power on EAN600, and wait about 3 seconds.
28