Setting Up The Hardware Connection - EverFocus EAN900 Installation Manual

1. Setting Up the Hardware Connection

1. Mount a lens to the camera. (Megapixel lens recommended for high image
quality.)
2. Connect the EAN900 Network Camera to a PC with a Cat.5 cable.
○,
1
○,
2
Feh
○,
4
Feh
○,
SD card: Slot to insert SD card.
1
○,
Video output: Loop through connection to the video signal from the Video In
2
connector. Terminated with a coaxial/BNC connector.
Note: 1. To see the image of video output, user must press Reset button for
about 35 seconds until the image is showed.
2. When switching to network video output, the camera power must be
○,
5
○,
○,
6
○
13
4
○ ,
8
7
EAN900
Feh
Feh
○,
9
Feh