EverFocus EAN600 User Manual page 23

(System)
14. System Version: System version.
15. Environment: Adjust it depend on the electric frequency in your working
environment. User has three selections for this option.
(Streaming)
16. Video Size: Users have two selection for configuring video size. (640x480
and 320x240)
17. Quality: Please select the quality that you want. (Please pay attention for
your bandwidth). There are two selections for you. (High & Normal)
18. Internet: If you choose Internet connection, please fill the bandwidth value.
19. Local Network: If you choose LAN connection, please select the number of
FPS (maximum frame rate could be 30 FPS), and enable or disable multicast.
(Password)
20. User Name: There are three levels for enter, please choose one of those.
(Please refer to page 20 for level definition)
21. Password: You can change your password here.
(Network) You can configure those configurations here.
22. Name: Please enter new name for EAN600 if you want.
23. IP: Please enter new IP address for EAN600 if you want.
24. NetMask: Please enter new NetMask for EAN600 if you want.
25. Gateway: Please enter correct gateway's IP address for EAN600 if you want.
26. Control Port: setting the control port, use this setting for configuring the
Virtual Server on your network.
27. Multicast IP: This IP is fixed. (Information)
28. Multicast Port: This port is fixed.
29. MAC Address: This is Ethernet standard for every end point in Network.
: Please click this button, after you configure those options,
which at above.
: Please clock this button, if you like to back to video.
23
EAN600