EverFocus EAN600 User Manual page 10

Power Disconnect:
Units with or without ON-OFF switches have power supplied to the unit whenever
the power code is inserted into the power source; however, the unit is operational
only when the ON-OFF switch is in the ON position. The power cord is the main
power disconnect for all units.
External Power Supplies
Use only the recommended power supplies. Power supplies must comply with the
requirement of
the latest version of IEC 60065/CNS 13439. Substitutions may damage the unit or
cause a fire or shock hazard
110V,60Hz Power Cords
110V,60Hz power cords, input and output, must comply with the latest versions of
IEC 60065/CNS 13439
Warning:
Electrostatic-sensitive device. Use proper CMOS/MOSFET handing precautions to
avoid electrostatic discharge.
UNPACKING
Unpack carefully.
This is electronic equipment and should be handled carefully.
Check to ensure that the following items are included;
• 1. EAN600
• 2. User's manual
• 3. Quick Installation Guide
• 4. Power Cord
If an item appears to have been damaged in shipment, replace it properly in its
carton and notify the shipper. If any items are missing, notify your Everfocus
10
EAN600