EverFocus EAN600 User Manual page 26

EAN600
Figure 2.
1. Mac: The Mac of EAN600.
2. IP: The IP address of EAN600.
3. Hardware Version: The boot loader version.
4. Firmware Version: The firmware version.
5. Name: The proper name of the EAN600, default is Network Camera.
6. Firmware location: Location of firmware.
7. Select same segment network card: Please select your local PC's IP address.
8. Update firmware: Please click this button, if you like to upgrade firmware.
9. Name: You can change EAN600's in here.
10. Static IP: Fixed IP address for EAN600.
11. DHCP: Set EAN600 to be DHCP client.
12. Exit: Out of CamTool.
13. Set: Press Set button, after you configure Network's option.
14. Change: Real Net Config and EEPROM Config switch.
15. MAC: MAC of EAN600's information.
16. IP: Please configure IP of EAN600 here.
17. NetMask: Please configure NetMask of EAN600 here.
18. Gateway: Please configure gateway address here.
19. Real Net Config / EEPROM Config switching information.
26