Table of Contents
Advertisement
Figure 48. Small Form-Factor Pluggable (SFP) Module
6. Insert the SFP module into the mini-hub port until it clicks into place.
Figure 49. Installing an SFP module in a mini hub
7. Reconnect the fiber-optic cables that you removed in Step 1 on page 54.
8. Check the indicator lights on the mini hub.
56
IBM TotalStorageFAStT900 Fibre Channel Storage Server: User's Guide
When the mini hub is operating properly, the green loop good light is lit and the
fault light is not lit. If the mini-hub port is in normal operation, the amber port
bypass light is not lit. If a problem is indicated, use the storage-management
software to check the FAStT900 Storage Server status. For more information,
see "Mini-hub indicator lights" on page 26.
Advertisement
Table of Contents
