Table of Contents
Advertisement
2. Replace the protective caps on the LC-LC Fibre Channel cables.
Figure 46. Replacing a failed SFP module
3. To remove the SFP module from the mini hub, perform the following steps:
a. Unlock the SFP module latch by pulling the plastic tab outward 10°, as
shown in Figure 47. Pull the failed SFP module from the mini hub.
b. With the SFP latch in the unlocked position, slide the SFP module out of the
mini-hub port.
Figure 47. Unlocking the SFP module latch
c. Replace the protective cap on the SFP module.
Attention:
When you handle static-sensitive devices, take precautions to
avoid damage from static electricity. For details about handling static-sensitive
devices, see "Handling static-sensitive devices" on page 37.
4. Unpack the new SFP module.
5. Remove the protective cap from the SFP module, as shown in Figure 48 on
page 56.
Chapter 3. Replacing the FAStT900 Storage Server components
55
Advertisement
Table of Contents
