Furuno RD-50 Operator's Manual page 68

4. INSTALLATION
Menu
L/L Digit
Without Checksum
I/O Port
Sensor Out
LCD RESET
SIM
Service RESET
4-16
Description
Select the number of digits to show after the
decimal point for minute of latitude and longi-
tude from [3digit] or [4digit].
• [Enable]: Receive NMEA 0183 sentences
with and without checksums.
• [Disable]: Do not receive NMEA 0183 sen-
tences that do not have checksums.
• [Port1]: Select baud rate setting from
[4800] or [38400] according to the equip-
ment connected.
• [SIO Monitor]: Monitor the SIO input signal.
For serviceman.
• [ON]: Share sensor signal, dimmer control-
ler and time data in the daisy chain. Use for
pattern 1 daisy chain (see pages 4-10 and
4-11).
• [OFF]: Share dimmer controller and time
data in the daisy chain. Use for pattern 2
daisy chain (see page 4-12).
For serviceman.
Turn the simulation mode on or off.
For serviceman.
Default
[4digit]
[Disable]
[4800]
[ON]
[OFF]